骑行开始或者结束：
if ( bycle_enable == 0 ) { bycle_enable = 1; config.train_bycle_utc = getUTC(); config.train_bycle_distance=pedometer.distance; config.train_bycle_pedometer =pedometer.counter; config.train_bycle_calorie =pedometer.calorie; } else { bycle_enable = 0; osal_set_event(taskStoreTaskId,TASK_STORE_SAVE_BYCLE_EVT ); }步行开始或者结束：
if ( running_enable == 0 ) { running_enable = 1; config.train_running_utc = getUTC(); config.train_running_distance = pedometer.distance; config.train_running_pedometer = pedometer.counter; config.train_running_calorie = pedometer.calorie; } else { running_enable = 0; osal_set_event( taskStoreTaskId，TASK_STORE_SAVE_RUNNING_EVT ); }数据保存：
if ( events & TASK_STORE_UPLOAD_RUNNING_EVT ) { // 一次运动结束,上传,以便通知APP读取 (使用iBand) // 上报协议格式 0x1B EN SS 00 00 00 D6 D5 D4 D3 D2 D1 D0 U3 U2 U1 U0 TH TL CRC memset( txbuf, 0, sizeof(txbuf) ); txbuf[0] = 0x1B; txbuf[1] = 3; // EN[3:0]--> 3 当前数据上报 txbuf[2] = 0; // SS bt_protocol_tx( txbuf, sizeof(txbuf) ); return ( events ^ TASK_STORE_UPLOAD_RUNNING_EVT ); } if ( events & TASK_STORE_SAVE_BYCLE_EVT ) { // 运动数据-自行车 // 保存格式 0xEN SS D6 D5 D4 D3 D2 D1 D0 U3 U2 U1 U0 TH TL CRC memset( txbuf, 0xFF, sizeof(txbuf) ); utc = getUTC(); unsigned long len = (utc - config.train_bycle_utc)/60; utc = config.train_bycle_utc; unsigned long va = pedometer.counter - config.train_running_pedometer; unsigned long vb = pedometer.calorie - config.train_running_calorie; unsigned long vc = pedometer.distance - config.train_running_distance; if ( vb == 0 ) { return ( events ^ TASK_STORE_SAVE_BYCLE_EVT ); } txbuf[0] = (0x1<<4) | 0; // EN[7:4]--> 1 骑行 txbuf[1] = 0x0 | (0x1<<3); // SS[3] --> 1 卡路里有效 txbuf[2] = (va>>14) & 0x7; /* D6D5...D0 */ txbuf[3] = (va>>6) & 0xFF; txbuf[4] = ((va&0x3F)<<2)|((vb>>15)&0x3); txbuf[5] = (vb>>7) & 0xFF; txbuf[6] = ((vb&0x7F)<<1) | ((vc>>16)&0x1); txbuf[7] = (vc>>8) & 0xFF; txbuf[8] = vc & 0xFF; txbuf[9] = utc>>24; /* U3U2...U0 */ txbuf[10] = utc>>16; txbuf[11] = utc>>8; txbuf[12] = utc & 0xFF; txbuf[13] = len>>8; /* TH */ txbuf[14] = len & 0xFF; /* TL */ txbuf[15] = 0xFF; /* CRC */; flash_memory_put( FMC_ID_RUNNING, txbuf, 16); osal_start_timerEx( task_id, TASK_STORE_UPLOAD_RUNNING_EVT, 800); return ( events ^ TASK_STORE_SAVE_BYCLE_EVT ); } if ( events & TASK_STORE_SAVE_RUNNING_EVT ) { // 运动数据-跑步-慢走快走 // 保存格式 0xEN SS D6 D5 D4 D3 D2 D1 D0 U3 U2 U1 U0 TH TL CRC memset( txbuf, 0xFF, sizeof(txbuf) ); utc = getUTC(); int len = (utc - config.train_running_utc)/60; utc = config.train_running_utc; unsigned long va = pedometer.counter - config.train_running_pedometer; unsigned long vb = pedometer.calorie - config.train_running_calorie; unsigned long vc = pedometer.distance - config.train_running_distance; if ( va == 0 ) { return ( events ^ TASK_STORE_SAVE_RUNNING_EVT ); } txbuf[0] = 0x0<<4 | 0; // EN[7:4]--> 0 步行 txbuf[1] = (0x0<<0) | (0x7<<2); // SS[1:0]--> 0 慢走 SS[2：4]-->7 卡路里、里程和步数都有效 txbuf[2] = (va>>14) & 0x7; /* D6D5...D0 */ txbuf[3] = (va>>6) & 0xFF; txbuf[4] = ((va&0x3F)<<2)|((vb>>15)&0x3); txbuf[5] = (vb>>7) & 0xFF; txbuf[6] = ((vb&0x7F)<<1) | ((vc>>16)&0x1); txbuf[7] = (vc>>8) & 0xFF; txbuf[8] = vc & 0xFF; txbuf[9] = utc>>24; /* U3U2...U0 */ txbuf[10] = utc>>16; txbuf[11] = utc>>8; txbuf[12] = utc& 0xFF; txbuf[13] = len>>8; /* TH */ txbuf[14] = len & 0xFF; /* TL */ txbuf[15] = 0xFF; /* CRC */; flash_memory_put( FMC_ID_RUNNING, txbuf, 16); osal_start_timerEx( task_id, TASK_STORE_UPLOAD_RUNNING_EVT, 800); return ( events ^ TASK_STORE_SAVE_RUNNING_EVT ); }数据发送
////////////////////////////////////////////////////////////////////////////// // // Upload the running data to app // // // if ( events & TASK_UPLOAD_STORE_RUNNING_1_EVT ) { // 运动数据 // 格式：1B EN SS C2 C1 C0 D6 D5 D4 D3 D2 D1 D0 U3 U2 U1 U0 TH TL CRC /** 蓝牙断开,不发送 */ if ( ble.isConnected != 1 ){ return (events ^ TASK_UPLOAD_STORE_RUNNING_1_EVT); } memset( txbuf, 0, sizeof(txbuf)); running_all = q.items; running_done = 0; txbuf[0] = 0x1B; txbuf[1] = 0x01; // EN txbuf[2] = 0x00; // SS txbuf[3] = running_all>>4; txbuf[4] = ((running_all & 0Xf)<<4) | ((running_done>>8)&0xF); txbuf[5] = running_done & 0xFF; if ( running_all != 0 ) { fret = load_queue( FMC_ID_RUNNING, &q, buf, 16 ); if ( fret == QUEUE_EMPTY ) { return ( events ^ TASK_UPLOAD_STORE_RUNNING_1_EVT ); } } txbuf[1] |= (buf[0] & 0xF0); // EN txbuf[2] = buf[1]; // SS memcpy( txbuf+6, buf+2, 7+4+2); bt_protocol_tx(txbuf, 20); if ( ++running_done < running_all ){ /* Done ? */ running_done++; osal_start_timerEx( task_id, TASK_UPLOAD_STORE_RUNNING_2_EVT, 400); } return (events ^ TASK_UPLOAD_STORE_RUNNING_1_EVT); } if ( events & TASK_UPLOAD_STORE_RUNNING_2_EVT ) { // 运动数据 // 格式：1B EN SS C2 C1 C0 D6 D5 D4 D3 D2 D1 D0 U3 U2 U1 U0 TH TL CRC if ( ble.isConnected != 1 ){ running_done = 0; return ( events ^ TASK_UPLOAD_STORE_RUNNING_2_EVT ); } txbuf[0] = 0x1B; txbuf[1] = 0x01; // EN txbuf[2] = 0x00; // SS txbuf[3] = running_all>>4; txbuf[4] = ((running_all & 0Xf)<<4) | ((running_done>>8)&0xF); txbuf[5] = running_done & 0xFF; fret = load_queue( FMC_ID_RUNNING, &q, buf, 16 ); if ( fret == QUEUE_EMPTY ) { return ( events ^ TASK_UPLOAD_SEG_PEDO_2_EVT ); } if ( running_done++ < running_all ) { txbuf[1] |= (buf[0] & 0xF0); // EN txbuf[2] = buf[1]; // SS memcpy( txbuf+6, buf+2, 7+4+2); running_done++; bt_protocol_tx( txbuf,20 ); osal_start_timerEx(task_id, TASK_UPLOAD_STORE_RUNNING_2_EVT, 400); }else{ running_done = 0; } return ( events ^ TASK_UPLOAD_STORE_RUNNING_2_EVT ); } 命令解析： case 0x1B: /** Get Running Data (All Data Null now)*/ // 0xFC 1B EN 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 if ( buf[2] == 0x0 ) { txbuf[1] = 0x0; }else if ( buf[2] == 0x1 ) { osal_set_event( taskUploadTaskId, TASK_UPLOAD_STORE_RUNNING_EVT ); return 0; }else if ( buf[2] == 0x2 ){ txbuf[1] = 0x02; // EN txbuf[2] = 0x00; // SS txbuf[3] = fm.erea[FMC_ID_RUNNING].items>>4; txbuf[4] = (fm.erea[FMC_ID_RUNNING].items & 0xF)<<4; }else{ txbuf[1] = 0x1<<7; } break;