在linux下配置ipv6 互通libvirt

xiaoxiao2021-02-28  124

First make sure you have two hosts installed with libvirt, qemu and virt- manager 首先,确保安装libvirt,qemu,virt-manage等包 首先配置ipv6  #ip6tables -F #service libvirtd restart **on client** 1 configure ipv6 global addr ifconfig eth0 inet6 add 2004:db8:ac10:fe01::2/64 2 configure server/client ipv6 hostname resolvation add the following line into /etc/hosts **2004:db8:ac10:fe01::3 server's hostname** **2004:db8:ac10:fe01::2 client's hostname** **on server** 3 configure ipv6 global addr ifconfig eth0 inet6 add 2004:db8:ac10:fe01::3/64 4. make sure the value of "auth_tcp" in "libvirtd.conf" is "none"  5. disable "listen_tls" and enable "listen_tcp" in "libvirtd.conf" 6.Enable LIBVIRTD_ARGS="--listen" in /etc/sysconfig/libvirtd 7. configure server/client ipv6 hostname resolvation add the following line into /etc/hosts **2004:db8:ac10:fe01::3 server's hostname** **2004:db8:ac10:fe01::2 client's hostname** 使用ping6 命令验证网络是否互通 8. Restart libvirtd service # service libvirtd restart 9.prepare a running guest and **make sure its graphic device is listening to
转载请注明原文地址: https://www.6miu.com/read-34043.html

最新回复(0)